HI9000 – 9000 lb/12V
Hydraulic Winch

  75-50085C

MilitaryRequestInformation

DESCRIPTION

The Mile Marker HI9000 12V Series Hydraulic winch is made to be permanently mounted to the front or rear of a vehicle and comes with the solenoid control valve factory mounted to the winch, allowing for a more efficient installation. Utilizing the vehicle’s power steering system as its power source ensures the HI9000 12V will run continuously, without draining the battery.

Completely element proof construction, corrosion and water resistant, the HI9000 12V features two speed; free spooling; mechanical lock; an integrated solenoid valve; stainless steel tie bars and fasteners; 100’ of steel cable; 9000 pounds of pulling capacity; and includes an illuminated joystick remote control. Requires a vehicle specific 35 Series valve adapter kit to adapt to the vehicle’s power steering pump.

12V
2 Speed
Mechanical Lock
Freespooling
Integrated Solenoid Valve
submersible
Corrosion Resistant
Stainless Steel Tie Bars and Fasteners
100 Feet of Steel Cable
Gear Train Planetary
Gear Ratio 6:1
Motor 17.9 cubic inch
Control Pendant Illuminated Joystick Remote, 12’
Cable 3/8” X 100’ (nominal 14,400 lbs) (9.53 mm X 30.5 m)
Drum Size 2.5” X 9” (63.5 mm X 228.6 mm)
Net weight 103 lbs (47 kgs)
Bolt Pattern 4 Bolt Pattern, 4.5” X 10”, (114.3 mm X 254 mm)
Power Steering Min. Requirements 3.5 GPM @ 1500 psi (13.25 L/m @ 103.4 bars)
3.5 GPM @ 1500 PSI (13.25 L/m @ 103.4 bars)
Layer of Cable 1 2 3 4
Line speed-low gear (FPM) 5.65 6.43 7.41 8.58
Rated pull (lbs.) 10,500 8,500 7,400 6,400
Line speed-high gear (FPM) 31 36 42 48
Rated pull (lbs.) 1,600 1,300 1,200 1,000