H12000 – 12000 lb.
The Mile Marker H12000 Series hydraulic winch is independent from its solenoid control valve to give more freedom in application and can be mounted to the front or rear of the vehicle as a permanent or detachable recovery system. Utilizing the vehicle’s power steering system as its power source allows the H12000 to run continuously without draining the battery.
Completely element proof construction, corrosion and water resistant, the H12000 features two speed; freespooling; a mechanical lock system; ductile iron body; stainless steel tie bars and fasteners; reversible mounting on 3 sides; 100’ of steel cable; 12,000 pounds of pulling capacity; and requires a vehicle specific 34 Series valve adapter kit for installation and operation.
|Can Use Underwater|
|Stainless Steel Tie Bars and Fasteners|
|100 Feet Galvanized Aircraft Cable|
|Motor||19.5 cubic inch|
|Control Pendant||Not Included, Requires 34 Series Kit|
|Cable||3/8” X 100’ (nominal 14,400 lbs) (9.53 mm X 30.5 m)|
|Drum Size||2.5” X 9” (63.5 mm X 228.6 mm)|
|Net weight||98 lbs (45 kgs)|
|Bolt Pattern||4 Bolt Pattern, 4.5” X 10”, (114.3 mm X 254 mm)|
|Power Steering Min. Requirements||3.5 GPM @ 1500 psi (13.25 L/m @ 103.4 bars)|
|3.5 GPM @ 1500 PSI (13.25 L/m @ 103.4 bars)|
|Layer of Cable||1||2||3||4|
|Line speed-low gear (FPM)||5.65||6.43||7.41||8.58|
|Rated pull (lbs.)||12,000||9,400||8,200||7,000|
|Line speed-high gear (FPM)||31||36||42||48|
|Rated pull (lbs.)||2,000||1,550||1,350||1,150|